Alphatech Slim IPDP - 01 Guide de l'utilisateur télécharger pdf (Page 6)

Page 6

4.3 Connecting the reader module with panel

Standard connection

Signal Connection

+ 8 ÷ + 28 VDC

+ contact (power supplier unit), red wire of C2 cable

(reader module), + contact (door lock)

0 V (GND)

- contact (power supplier unit), grey wire of C2 cable

(reader module), COM contact of relay 1 (entry panel)

Release lock from panel,

0 VDC active

NO contact of relay 1 (entry panel), orange wire of C1

cable (reader module)

Release lock from reader

Blue wire of C2 cable (reader module), - contact (door

lock)

Table 6: Standard reader module connection using the entry panel door lock release signal

This connection requires configuring the function of

the second input of the reader module as Request

to exit button (default module setting, see pic. 4).

The standard entry panel door lock release signal

is used as a signal for the reader module (orange

wire) to release the door lock then. The door lock

release is controlled by the output of the reader

module (open collector, 0 V (GND) active – blue

wire).

The reader module is powered by a DC power supplier. When using suitable power

supplier and door lock type, you can power all components (entry panel, reader module

and door lock) from a single power supplier. If an AC powered door lock must be used, it is

necessary to use an individual external relay controlled by the OC signal from the reader

module to control the door lock.

Pic. 4: Reader module setting

Pic. 3:

Standard reader module connection with use

DC power supply

and the lock opening contact of the IPDP Slim entry panel

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Pas de commentaire

Alphatech Slim IPDP - 01 Guide de l'utilisateur Page 6